Civil Engineering Interview Questions
Welcome to PCE.THEBEDA.COM, the emerging Civil Engineering Blog For Civil Engineers. Following are the topics for CIVIL ENGINEERING INTERVIEW QUESTIONS. Check and Select them carefully. Each topic have few sets of Questions with detailed answer. We also have an another post named “150 TOP MOST CIVIL ENGINEERING Interview Questions and Answers” on this blog. Don’t Forget to check that post. In this Posts CIVIL ENGINEERING INTERVIEW QUESTIONS are listed with Short answers only. All the Best.
Civil Engineering Interview Questions Topic Building materials and Construction
[su_spoiler title=”1.What are the dimensions of the standard brick? ” style=”fancy”]For India, a brick of standard size 190 mm x 90 mm x 90 mm is recommended by the BIS.[/su_spoiler]
[su_spoiler title=”2.What are thin shell roofs? Why are they becoming popular? ” style=”fancy”]Shell roofs are made from structural ‘skins’ where the shell material is thin in section relative to the other dimensions of the roof and undergoes relatively little deformation under load.[/su_spoiler]
[su_spoiler title=”3. Name the different types of retaining walls.” style=”fancy”]
- Sheet piling.
- Bored pile.
- Soil nailing.
- Mechanical stabilization.
Civil Engineering Interview Questions Topic Structural Analysis
[su_spoiler title=”What is buckling or crippling load? ” style=”fancy”]Crippling is just like buckling, but it happens in the web of a beam when it is being compressed. It often occurs at the supports of a beam, where the bottom flange is resting on a support, and the top flange is holding up the load, such as on a bridge abutment.[/su_spoiler]
[su_spoiler title=”Define slenderness ratio. What is its effect on design of compression members? ” style=”fancy”]Slenderness ratio is the ratio of the length of a column and the least radius of gyration of its cross section. Often denoted by lambda. It is used extensively for finding out the design load as well as in classifying various columns in short/intermediate/long. Example- Short Steel column – lambda is less than 50.[/su_spoiler]
[su_spoiler title=”What is meant by specific yield and specific retention? ” style=”fancy”]The Specific Retention (Sr) of a rock or soil is the ratio of the volume of water a. rock can retain against gravity to the total volume of the rock. Therefore, the total porosity is equal to the volume or water that a rock will yield.
Specific retention (Sr), specific yield (Sy) and total porosity (n) (from Heath 1983). Specific yield is defined as the volume of water released from storage by an unconfined aquifer per unit surface area of aquifer per unit decline of the water table.[/su_spoiler]
[su_spoiler title=”Shear force and BM diagrams for different types of loadings on beams” style=”fancy”]Check Posts.[/su_spoiler]
Civil Engineering Interview Questions Topic Mechanics of structures
[su_spoiler title=”Differentiate between bending moment and twisting moment ” style=”fancy”] bending moment is the force that is trying to bend ur structure, and it is calculated as force multiplied by perpendicular distance. …
Twisting moment is the torque applied which produces shear stress in ur structure.[/su_spoiler]
[su_spoiler title=”Differentiate between mild steel and HYSD bars” style=”fancy”]
Mild steel is the common steel available for fabrications as it is more ductile.Its a low carbon steel.
HYSD stands for High Yielding Strength Deformed bars. These bars have more yield strength than Mild Steel. Unlike TMT bars, HYSD bars are both hot or cold worked. They are graded as Fe 415 or Fe500.[/su_spoiler]
[su_spoiler title=”Differentiate between proof resilience and modulus of resilience ” style=”fancy”]Proof resilience is defined as the maximum energy that can be absorbed up to the elastic limit, without creating a permanent distortion.
The modulus of resilience is defined as the maximum energy that can be absorbed per unit volume without creating a permanent distortion.
[su_spoiler title=”What is meant by strain energy?” style=”fancy”]Strain energy is defined as the energy stored in a body due to deformation. The strain energy per unit volume is known as strain energy density and the area under the stress-strain curve towards the point of deformation. When the applied force is released, the whole system returns to its original shape.[/su_spoiler]
Civil Engineering Interview Questions Topic Fluid Mechanics
What is a spillway?
What is total energy line?
What is a flow net? Discuss its uses
Why isn’t a venturimeter used commonly for measuring discharge in houses?
What is critical hydraulic gradient?
Differentiate between weir, notch and barrage
Civil Engineering Interview Questions Topic Geotechnical Engineering
What is geosynthetics? Mention its applications in civl engineering field
What do you understand by 80/100 bitumen?
Which is commonly used-bitumen or tar? Why?
What are the precautions to be taken for construction in marshy soil?
What is the relation between submerged unit weight and submerged weight?
What are the different types of foundations adopted for different soils?
What is differential settlement?
Discuss the importance of Attenbug’s limits in soil engineering
Differentiate between activity and sensitivity of soils
Differentiate between soil stabilization and ground improvement
How does machine foundation differ from an ordinary foundation?
What is the permanent solution applied for the restoration of leaning Tower of Pisa?
Civil Engineering Interview Questions Topic Reinforced Concrete Structures
What is pre stressed concrete? What are its ingredients?
What do 53 stand for in 53-grade cement?
How do you construct a 25 storey building with no columns?
What are the loads to be considered for the design of bridges?
Differentiate between pre-tensioning and post-tensioning
What is the L/D ratio of a cantilever beam?
What type of dam is the Idukki dam? Give its details and peculiarity
Civil Engineering Interview Questions Topic Transportation Engineering
What is camber?
What is cutback bitumen? What are its special uses?
Draw a typical C.S. of a permanent way
What does IRC stand for?
Define angularity number and give practical applications
What material as ballast would you suggest for a high speed track? Why?
What is the usual width of a single lane and a double lane road?
Civil Engineering Interview Questions Topic Environmental Engineering
Distinguish between slow and rapid sand filters
What is super chlorination?
What is canopy?
Differentiate between BOD and COD
Advanced Construction and Construction Technology
What is batching? Differentiate between volume and weight batching
How is underwater concreting carried out?
What are the forces involved in underwater construction?
What do 20 stand for in M20 mix concrete?
Civil Engineering Interview Questions Topic Engineering Geology
What is littoral drift?
Differentiate between faults and folds
Civil Engineering Interview Questions Topic Surveying
How is a theodolite leveled?
What are advantages of electronic theodolite over transit theodolite?
Give the standard lengths of chains used in surveying
What is a benchmark? Name the different types.
[su_note radius=”10″][contact-form to=’firstname.lastname@example.org’ subject=’QUESTION ‘][contact-field label=’Name’ type=’name’ required=’1’/][contact-field label=’Email’ type=’email’ required=’1’/][contact-field label=’WhatsApp No.’ type=’text’ required=’1’/][/contact-form][/su_note]
[su_button url=”#” size=”10″ wide=”yes” center=”yes”]CIVIL ENGINEERING INTERVIEW QUESTIONS SET 1[/su_button]
- Building Materials
- Soil Mechanics and Foundation Engineering
- Applied Mechanics
- Waste Water Engineering
- RCC Structures Design
- Construction Management
- Theory of Structures
- Estimating and Costing
- Docks and Harbours
- Elements of Remote Sensing
- UPSC Civil Service Exam Questions
[su_button url=”#” size=”10″ wide=”yes” center=”yes”]CIVIL ENGINEERING INTERVIEW QUESTIONS SET 2[/su_button]
- Building Construction
- Concrete Technology
- Advanced Surveying
- Strength of Materials
- Water Resources Engineering
- Water Supply Engineering
- Steel Structure Design
- Highway Engineering
- Airport Engineering
- SI Units
- Structural Design Specifications
- Engineering Economy
- GATE Exam Questions